Background The HackRF One is a Software Defined Radio (SDR) device with the ability to digitize radio signals that are. HackRF One – The device used to receive and transmit signals. The packaging includes: a. The HackRF One device. Micro- USB to USB cable used to connect the HackRF One device to a computer.
We recommend getting started by watching the Software Defined Radio with HackRF video series. This series will introduce you to HackRF One, software including GNU Radio, and teach you the fundamentals of Digital Signal Processing (DSP) needed to take full advantage of the power of Software Defined Radio (SDR). Additional helpful information follows.
Try Your HackRF with Pentoo Linux
The easiest way to get started with your HackRF and ensure that it works is to use Pentoo, a Linux distribution with full support for HackRF and GNU Radio. Download the latest Pentoo .iso image from one of the mirrors listed at http://pentoo.ch/download/. Then burn the .iso to a DVD or use UNetbootin to install the .iso on a USB flash drive. Boot your computer using the DVD or USB flash drive to run Pentoo. Do this natively, not in a virtual machine. (Unfortunately high speed USB operation invariably fails when people try to run HackRF from a virtual machine.)
Once Pentoo is running, you can immediately use it to update firmware on your HackRF or use other HackRF command line tools. For a walkthrough, watch SDR with HackRF, Lesson 5: HackRF One.
To verify that your HackRF is detected, type
hackrf_info at the command line. It should produce a few lines of output including 'Found HackRF board.' The 3V3, 1V8, RF, and USB LEDs should all be illuminated and are various colors.
You can type
startx at the command line to launch a desktop environment. Accept the 'default config' in the first dialog box. The desktop environment is useful for GNU Radio Companion and other graphical applications but is not required for basic operations such as firmware updates.
Now you can use programs such as gnuradio-companion or gqrx to start experimenting with your HackRF. Try the Examples below. If you are new to GNU Radio, an excellent place to start is with the SDR with HackRF video series or with the GNU Radio guided tutorials.
Alternative: GNU Radio Live SDR Environment
The GNU Radio Live SDR Environment is another nice bootable Linux .iso with support for HackRF and, of course, GNU Radio.
Software Setup
As mentioned above, the best way to get started with HackRF is to use Pentoo Linux. Eventually you may want to install software to use HackRF with your favorite operating system. Autodata 3.38 crack.
If your package manager includes the most recent release of libhackrf and gr-osmosdr, then use it to install those packages in addition to GNU Radio. Otherwise, the recommended way to install these tools is by using PyBOMBS.
See the Operating System Tips page for information on setting up HackRF software on particular Operating Systems and Linux distributions.
If you have any trouble, make sure that things work when booted to Pentoo. This will allow you to easily determine if your problem is being caused by hardware or software, and it will give you a way to see how the software is supposed to function.
Examples
A great way to get started with HackRF is the SDR with HackRF video series. Additional examples follow:
![]()
Testing the HackRF
If everything is OK, you should see something similar to the following:
hackrf_info version: 2017.02.1
libhackrf version: 2017.02.1 (0.5) Found HackRF Index: 0 Serial number: 0000000000000000################ Board ID Number: 2 (HackRF One) Firmware Version: 2017.02.1 (API:1.02) Part ID Number: 0x######## 0x########
FM Radio Example
This Example was derived from the following works:
Since I have been using software defined radio (SDR) tools on Linux platform for a long time, it was a very new thing to me when I had to use some SDR tools on Windows. Anyway, the installation of the relevant drivers went smoothly and the devices were ready to use within a short while. In this post, I'm writing down the steps I followed to get my RTL-SDR dongle and HackRF device up and running on a Windows 10 machine. Here we go.
Instructions for RTL-SDR:
(1) Connected RTL-SDR dongle to the USB port and Windows automatically detected the device and installed some drivers. But, we need to manually install a special driver called ExtIO.(2) Download the Zadig USB driver installer from here: http://zadig.akeo.ie/ No installation necessary. It can be run immediately. (3) Run Zadig executable. With all the default settings, click 'Install Driver' to install the WinUSB driver.
(4) Download and install HDSDR tool. Even though we install it, do not attempt to use RTL-SDR with HDSDR software yet. http://hdsdr.de/download/HDSDR_install.exe (5) Download the ExtIO driver DLL for RTL-SDR from here. Hackrf One Tutorial Softwarehttp://hdsdr.de/download/ExtIO/ExtIO_RTL2832.dll (6) Copy the ExtIO driver DLL file to the installation directory of our HDSDR software which we installed a short while ago. In my system, this directory is, C:Program Files (x86)HDSDR Hackrf One Tutorial(7) Now, start HDSDR. In my system, HDSDR automatically picked the RTL-SDR dongle as the input and sound card as the output and started picking signals. That means everything is working.
Instructions for HackRF:
(1) Connect the HackRF to the USB port and windows automatically detected it and installed some drivers.
(2) Download the Zadig USB driver installer from here: http://zadig.akeo.ie/ No installation necessary. It can be run immediately. (3) Run Zadig executable. From the options menu, select 'List All Devices'. Then from the drop-down list, select 'HackRF One'. (4) Since I have already installed the WINUSB driver for RTL-SDR, I don't have to do anything here. It shows that the driver is the latest already. In case you don't have that option, go ahead and click 'Install Driver' to install the WinUSB driver. (5) Download and install HDSDR tool. Even though we install it, do not attempt to use HackRF with HDSDR software yet. http://hdsdr.de/download/HDSDR_install.exe (6) Download the ExtIO driver DLL for HackRF from here. https://github.com/jocover/ExtIO_HackRF/releases (7) Copy the ExtIO driver DLL file to the installation directory of our HDSDR software which we have installed. In my system, this directory is, C:Program Files (x86)HDSDR (8) Now, start HDSDR. In my system, HDSDR automatically prompted asking to select which DLL to be used, either RTL-SDR or HackRF. Select the DLL file for HackRF and it starts picking signals. That means everything is working. Hackrf One Tutorial WindowsComments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |